You currently have no items in your shopping cart.
-
Buy
-
Temperature Products
- Bimetal
- Digital
- RTD Assembly
- Thermowells
- Surface
- Calibrator
- Non-Contact Infrared
- Food Service
- Barbecue
Pressure ProductsSpecialty Products
-
SANITARY RESISTANCE TEMPERATURE DETECTORS (RTDs)
Standard sanitary resistance temperature detector assemblies include a proven thin film PT100 platinum RTD sensing element, packaged in an all welded 316 stainless steel probe. Configurations feature Tri-Clover® fittings and surface finishes that comply with 3A Standard Number 74-07 for food, dairy, beverage, pharmaceutical and chemical processing applications. A compact programmable transmitter can also be built into the probe assembly.
SPAA3, which can be paired with a connection head and programmable transmitter for 4-20 mA, HART or mV output, using 2 or 3 wire PT100 sensors. Unterminated (bare wire) or M12 connection termination options are also available.
STAA3 features a PT100 RTD with a factory configured, built-in 4-20mA transmitter and termination options that include an M12 connector with or without mate and cable, or strain relief with cable.Tel-Tru Industrial resistance temperature detectors (RTDs) are highly configurable to fit your temperature requirements and deliver outstanding reliability.
TO ORDER, CLICK ON THE LINKS TO PRODUCTS BELOW.
 |
Sanitary RTD Probe Assembly, SPAA3 |
 |
Sanitary RTD Probe Assembly with Built-In Transmitter, STAA3 |
Resistance Temperature Detector Features
- Configured to meet your exact needs, including compatability with Clean-in-Place (CIP) processes
- High accuracy, long term stability, consistent repeatability
- Fast response time
- All welded construction
- Options include various termination and transmitter selections
- NIST traceable calibration certificate available
Resistance Temperature Detector Specifications
Environmental |
|
| Protection: | IP67 (NEMA 6) |
| Operating temp. range: | -40°F to 176°F (-40°C to 80°C) |
Mechanical |
|
| Probe lengths: | 2.5" to 18" (6.35cm to 45.72cm) |
| Probe diameters: | 0.187" or 0.250" (0.47cm to 0.64cm) |
| Probe and housing material: | 316SS with Tri-Clamp CIP fitting |
| Max operating pressure: | 1500 PSIG max (probe only) |
| Connection head: | Polypropylene, 316SS, Anodized Aluminum |
Electrical |
|
| Input: | RTD, type Pt100 (α=0.00385), 3-wire |
| Sensor: | Thin film Pt100 RTD TCR .00385 Accuracy Class A +/- .06% at 0°C Conforms to IEC 751 |
| Lead Wires: | 3 wires, Teflon insulated |
| Termination: | Options include connection heads, unterminated (bare wire), M12 connector with/without mate and cable, strain relief with cable |
| Output (transmitter equipped): | 4-20 mA or HART See individual transmitter specification sheets for more details (below) |
| Temperature Ranges: | Broad selection of standard ranges available Custom ranges available from -103 to 392°F (-75 to 200°C) Minimum span 45°F (25°C) |
| Transmitter Specifications: | XTRC-1202, 4-20 mA output, RTD only XTRC-1220, 4-20 mA output, RTD and T/C XTRC-1330, 4-20 mA output, RTD, T/C, ohm and mV XTRC-1530, 4-20 mA/HART output, RTD, T/C, ohm and mV Built-in Transmitter, 4-20 mA loop powered |
Click to view dimensional drawings:
RTD Probe Assembly
RTD Probe Assembly with Built-in Compact Transmitter
RTD Probe Assembly
RTD Probe Assembly with Built-in Compact Transmitter
Click here to view wiring and installation instructions, as well as examples of mounting locations for various pipe sizes and configurations. Minimum recommended insertion length = 1".
©TelTru.com 2024. All Rights Reserved.
