TEL-TRU CHECK-TEMP CALIBRATORS
Fast, easy to use, and accurate! The Tel-Tru Check-Temp Calibrator allows accurate verification of thermometer accuracy at the temperature point critical to the user's actual application. Environmental Safety and Health Professionals, Quality Assurance Managers and HACCP Coordinators in food processing/smoking, preparing/cooking, holding/serving and cooling/storage are using the Check-Temp Calibrator to verify the accuracy of their dial and digital thermometers.
The multi-hole Check-Temp Calibrators allow you to verify the accuracy of dial thermometers and digital probes of all sizes. They fit probes up to .250", .125", .187" and .375" diameter. Single hole Check-Temps fit probes up to .150" diameter. Custom hole diameters and custom temperature points available, please consult factory.
| TO ORDER, REVIEW THE CHARTS BELOW AND CHOOSE THE APPROPRIATE MODEL. |  |
As part of your HACCP Program, use Tel-Tru Check-Temp Calibrators to verify the accuracy of your food service and laboratory thermometers.
Verify the accuracy of dial thermometers and digital probes of all sizes Optional factory re-certification and maintenance program Built-in circuitry to warn if unit is more than 1°F out of calibration Use with Dial Type thermometers - Built-in tool for holding the calibration nut makes adjustments fast and easy Use with Digital Thermometers - Compare actual performance to accuracy specifications Temperature Units - Check and calibrate at your critical temperature point Accessories: Carrying case (padded Cordura® nylon); dial adjustment tool; cleaning brushes; tip sensitive probe adapter
Thank you for considering Tel-Tru’s Check-Temp Calibrator as your calibrating instrument! Please take a few moments to carefully review the listed items below for more information on using, caring, and re-certifying your calibrator.
Check-Temp Instructions – These basic instructions can be placed on top of the unit or you may post them on a wall near the unit’s placement. Review these instructions with all users of the Tel-Tru Check-Temp Calibrator. Care and Use Instructions, Warranty – This form is an addendum to the basic instructions. Order your Re-Certification – If your HACCP verification program requires annual re-certification, click here to order online. Or, you may use this Annual Re-Certification and Maintenance Notification Service (fill out and return the enclosed fax back form or call us for more information). How to Pack your Calibrator – If you need to send your Check-Temp back for servicing or re-certification, please follow these instructions for safe shipment. Additional Literature – See our Buyer's Guide and Check-Temp pricesheet for information on other Tel-Tru products and accessories.
SINGLE HOLE UNITS
| SPECS | |||
| Setpoint | 140°F | 160°F | 212°F |
| Accuracy | ±0.2°F | ±0.2°F | ±0.2°F |
| Stability | ±0.06°F | ±0.06°F | ±0.06°F |
| Heating Time | Approx. 8 min. | Approx. 10 min. | Approx. 10 min. |
| Fits Probes Up To | .150" | .150" | .150" |
| Temp. Control Zone | Drawing A | Drawing A | Drawing A |
| Voltage | 90 to 130 VAC, 50/60 Hz | 90 to 130 VAC, 50/60 Hz | 90 to 130 VAC, 50/60 Hz |
| Power | 45 Watts | 45 Watts | 45 Watts |
| Weight | 8.9 lbs. | 8.9 lbs. | 8.9 lbs. |
| Housing Material | Stainless Steel 304SS | Stainless Steel 304SS | Stainless Steel 304SS |
| Size | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) |
MULTI HOLE UNITS
| SPECS | |||
| Setpoint | 40°F | 40°F and 160°F | 5°C and 90°C |
| Accuracy | ±0.2°F | ±0.2°F | ±0.2°F |
| Stability | ±0.09°F | ±0.07°F | ±0.07°F |
| Heating Time | Approx. 3 min. | Approx. 3 min. | Approx. 3 min. |
| Fits Probes Up To | .250", .125", .187" and .375" | .250", .125", .187" and .375" | .250", .125", .187" and .375" |
| Temp. Control Zone | Drawing A | Drawing A | |
| Voltage | 90 to 130 VAC, 50/60 Hz | 90 to 130 VAC, 50/60 Hz | 90 to 130 VAC, 50/60 Hz |
| Power | 25 Watts | 25 Watts | 25 Watts |
| Weight | 9.2 lbs. | 9.2 lbs. | 9.2 lbs. |
| Housing Material | Stainless Steel 304SS | Stainless Steel 304SS | Stainless Steel 304SS |
| Size | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) |
| SPECS | ||
| Setpoint | 40°F | 40°F and 160°F |
| Accuracy | ±0.2°F | ±0.2°F |
| Stability | ±0.09°F | ±0.07°F |
| Heating Time | Approx. 3 min. | Approx. 5 min. |
| Fits Probes Up To | .250", .125" and .187" | .250", .125" and .187" |
| Temp. Control Zone | Drawing B | Drawing B |
| Voltage | 90 to 130 VAC, 50/60 Hz | 90 to 130 VAC, 50/60 Hz |
| Power | 25 Watts | 25 Watts |
| Weight | 9.2 lbs. | 9.2 lbs. |
| Housing Material | Stainless Steel 304SS | Stainless Steel 304SS |
| Size | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) | 3-1/16" H x 6-5/8" W x 10-7/8"D (78 mm x 168 x 276 mm) |
YOU MAY ALSO BE INTERESTED IN:
![Click here to view dimensional drawing of Check-Temp](javascript:newWindow("/images/sfsub_categories/check-temp.gif", "lineart")){kind=link}
![Click here to view the Temperature Control Zone](javascript:newWindow("/images/diags/ct_controlzone.jpg", "lineart")){kind=link}