Pt TMT180

Temperature head transmitter for resistance thermometer Pt100, adjustable via PC, for mounting in a connection head DIN Form B.

• Universal PC programmable (PCP)
• 2 wire technology, 4 to 20 mA analog output
• High accuracy in total ambient temperature range
• Fault signal on sensor break or short circuit, NAMUR NE 43 compliant
• EMC to IEC 61 326-1, CE
• UL recognized component to UL 3111-1
• Ship building approval GL
• CSA General Purpose
• Configuration during measurement using configuration kit
• Customer specific measurement range setting

FIELD OF APPLICATION

• PC programmable (PCP) Temperature head transmitter for converting a Pt100 input signal into a scalable 4 to 20 mA analog output signal
• Input: Resistance thermometer (RTD) Pt100
• Configuration using a PC with TMT181A or TXU10-AA configuration kit (PC-software ReadWin® 2000)

For more detailed Pt TMT180 specifications, click here.

HART® TMT182

Universal temperature head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters, adjustable via HART protocol, for installation in a connection head DIN Form B.

• Universal settings with HART protocol
• Operation, visualization and maintenance via PC, e. g. Fieldcare or ReadWin® 2000 operating software
• 2 wire technology, 4 to 20 mA analog output
• High accuracy in total ambient temperature range
• Fault signal on sensor break or short circuit, NAMUR NE 43 compliant
• EMC to NAMUR NE 21, CE
• UL recognized component to UL 3111-1
• Ex-Certification
  - ATEX Ex ia and dust zone 22 in compliance with EN 50281-1
  - FM IS
  - CSA IS
• Galvanic isolation
• Output simulation
• Min./max. process value indicator function
• Customer specific linearization
• SIL2 compliant

FIELD OF APPLICATION

• Temperature head transmitter with HART -protocol for converting various input signals into a scalable 4 to 20 mA analog output signal
• Input:
  - Resistance thermometer (RTD)
  - Thermocouple (TC)
  - Resistance transmitter (Ohm)
  - Voltage transmitter (mV)
• HART protocol for front end unit or panel unit operation using the hand operating module (DXR275, DXR375) or PC (e. g. ReadWin® 2000 or FieldCare)

For more detailed HART TMT182 specifications, click here.