BC550R Bottom Connect Thermometer, 5 inch dial, 304SS wetted parts

Model: 4010
  • 5" Dial
  • .250" Diameter stem standard
  • 304SS External Parts
  • Calibration Feature

  • Lead Time:  Ships three business days ARO
    If you require custom configurations that are not available on this page, please contact us.
    Making selections in the following sections may change the final product price.
    Custom stem lengths available upon request (up to 120")
    2.5 inch stem
    4 inch stem
    6 inch stem
    9 inch stem
    12 inch stem
    15 inch stem
    18 inch stem
    24 inch stem
    30 inch stem
    36 inch stem
    42 inch stem
    48 inch stem
    54 inch stem
    60 inch stem
    66 inch stem
    72 inch stem
    Thermometers with temperature ranges 200/1000ºF and 100/550ºC are NOT recommended for continuous use above 800ºF (425ºC) --- for intermittent use only. Minimum stem length is 4" with the range -50/25°C.
    Some lens options are invalid with this temp range
    Ambient temperature should not exceed 200°F (93°C) or 150°F (65°C) for silicone fill. If using silicone fill, please select Polycarbonate lens in section G. Process temperatures for silicone fill units minimum range -50ºF (-45ºC) and maximum range 500ºF (260ºC).
    1/4" NPT connection is standard for 2" dials. 1/2" NPT is standard for all others.
    The .250" blunt tip is standard up to 42", and the .375" blunt tip is standard over 42". Custom tips available upon request.
    .250 inch stem diameter, blunt tip
    .250 inch stem diameter, pointed tip
    .375 inch stem diameter blunt tip -- up to 42 inch stem
    .375 inch stem diameter blunt tip -- over 42 inch stem
    If using Silicone Fill, please select Polycarbonate, Acrylic, or Shatterproof lens.
    Bottom connection at 6:00 is standard


    • 6 inch stem
    • 0/220 degrees F
    • 304SS dry
    • 1/2 inch NPT connection
    • .250 inch stem diameter, blunt tip
    • Glass
    • ±1% accuracy
    (0.00)stars out of 5
    # of Ratings: 0